Subaru Impreza 2003 Service Manual page 181

B: INSTALLATION
1) Support the fuel tank with transmission jack and
push the fuel tank harness into access hole with
grommet.
2) Set the fuel tank, and then temporarily tighten
the bolts of fuel tank bands.
WARNING:
A helper is required to perform this work.
3) Connect the two-way valve hose (A) to two-way
valve, and then connect the canister hose (B) to
canister.
(A)
4) Connect the fuel filler hose and air vent hose.
FUEL TANK
FU-00411
(B)
FU-00091
FU-00092
FU(H4SO)-53
FUEL INJECTION (FUEL SYSTEMS)
5) Connect the fuel hoses, and then secure them
with clips and quick connector. <Ref. to FU(H4SO)-
66, INSTALLATION, Fuel Delivery, Return and
Evaporation Lines.>
6) Tighten the band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
7) Install the rear crossmember. <Ref. to RS-22,
INSTALLATION, Rear Crossmember.>
8) Connect the connector (A) to the fuel tank cord,
and then plug the service hole with grommet (B).
(A)
9) Set the rear seat and floor mat.
FU-00093
FU-00411
(B)
FU-00090