Subaru Impreza 2003 Service Manual page 195

FUEL DELIVERY, RETURN AND EVAPORATION LINES
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Ensure the two retainer pawls are engaged in
their mating positions in connector.
• Be sure to inspect the hoses and their con-
nections for any leakage of fuel.
(A) Connector
(B) Retainer
(C) Pipe
2) Connect the fuel delivery hose to pipe with an
overlap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When the fitting length is specified.
Type B: When the fitting length is not specified.
2: 2.5 ± ± ± ± 1.5 mm (0.098 ± ± ± ± 0.059 in)
L: 22.5 ± ± ± ± 2.5 mm (0.886 ± ± ± ± 0.098 in)
( 1 )
Type A
Type B
(1) Fitting
(2) Clamp
(3) Hose
FU-00127
( 2 ) ( 3 )
L
FU-00128
FU(H4SO)-67
FUEL INJECTION (FUEL SYSTEMS)
3) Connect the evaporation hose to pipe by approx.
15 to 20 mm (0.59 to 0.79 in) from the hose end.
L = 17.5 ± ± ± ± 2.5 mm (0.689 ± ± ± ± 0.098 in)
CAUTION:
Be sure to inspect the hoses and their connec-
tions for any leakage of fuel.
(1)
(1) Hose
(2) Clip
(3) Pipe
C: INSPECTION
1) Make sure that there are no cracks on the fuel
pipes and fuel hoses.
2) Make sure that the fuel pipe and fuel hose con-
nections are tightened firmly.
(2) (3)
L/2
L
FU-00129