Subaru Impreza 2003 Service Manual page 193

FUEL DELIVERY, RETURN AND EVAPORATION LINES
28.Fuel Delivery, Return and Evaporation Lines
A: REMOVAL
1) Set the vehicle on a lift.
2) Release the fuel pressure. <Ref. to FU(H4SO)-51, RELEASING OF FUEL PRESSURE, OPERATION,
Fuel.>
3) Open the fuel filler flap lid, and then remove the fuel filler cap.
4) Remove the floor mat. <Ref. to EI-55, REMOVAL, Floor Mat.>
5) Remove the fuel delivery pipes and hoses, fuel return pipes and hoses, evaporation pipes and hoses.
6) In the engine compartment, detach the fuel de-
livery hose (A), return hose (B) and evaporation
hose (C).
(C)
7) Lift-up the vehicle.
(A)
(B)
FU-00374
FU(H4SO)-65
FUEL INJECTION (FUEL SYSTEMS)
8) Disconnect the two-way valve hose (A) from
two-way valve and disconnect the canister hose (B)
from canister.
(A)
FU-00122
(B)
FU-00091