Subaru Impreza 2003 Service Manual page 318

Hide thumbs Also See for Impreza 2003:

Table of Contents

6) Install the under cover.

7) Tighten the bolts which install the front and cen-

ter exhaust pipe assembly to rear exhaust pipe.

Tightening torque:

18 N·m (1.8 kgf-m, 13.0 ft-lb)

8) Tighten the bolt which holds the front and center

exhaust pipe assembly to hanger bracket.

Tightening torque:

35 N·m (3.6 kgf-m, 26.0 ft-lb)

9) Lower the vehicle.

FRONT EXHAUST PIPE

10) Connect the rear oxygen sensor connector.

11) Connect the front oxygen (A/F) sensor connec-

12) Connect the battery ground cable to battery.

C: INSPECTION

1) Make sure there are no exhaust leaks from con-

nections and welds.

2) Make sure there are no holes or rusting.

Show Quick Links

Chapters

Table of Contents