Subaru Impreza 2003 Service Manual page 376

SPEED CONTROL SYSTEMS
C: DISASSEMBLY
1) Remove the clip, and then remove the accelera-
tor pedal from bracket.
2) Pull out the spring pin, and then remove the ac-
celerator pedal from accelerator pedal lever.
• LHD MODEL
(A)
(E)
(G)
(I)
(A) Accelerator bracket
(B) Stopper
(C) Bushing
(D) Clip
(E) Accelerator spring
(F) Accelerator pedal spring
(G) Accelerator pedal lever
(H) Spring pin
(I) Accelerator pedal
(J) Kick-down switch (AT model)
ACCELERATOR PEDAL
(B)
(C)
(D)
(J)
(F)
(H)
SP-00024
SP(H4SO)-6
• RHD MODEL
(A)
(B)
(C)
(D)
(E)
(A) Accelerator bracket
(B) Stopper
(C) Bushing
(D) Clip
(E) Accelerator spring
(F) Accelerator pedal spring
(G) Accelerator pedal lever
(H) Spring pin
(I) Accelerator pedal
(J) Kick-down switch (AT model)
D: ASSEMBLY
Assemble in the reverse order of disassembly.
NOTE:
Clean and apply grease to the portions indicated in
the figure.
Grease:
SUNLIGHT No.2 (Part No. 003602010)
(G)
(J)
(F)
(H)
(I)
SP-00025