Touch Panel Assy - Brother DCP-7090 Service Manual

9.13.3 Touch panel ASSY

(1) Remove the four Taptite cup B M3x10 screws to remove the Panel key PCB presser from
the Panel unit.
(2) Disconnect the Touch panel flat cable from the Key PCB ASSY. Remove the Key PCB
ASSY from the Panel unit.
(3) Release each Lock to remove the Anti static plate from the Panel unit.
(4) Release the Touch panel plate from the Boss, and slide it in the direction of the arrow to
remove it from the Panel unit. Remove the LCD frame sheet from the Panel unit.
(5) Remove the Touch panel ASSY from the Panel unit.
Touch panel plate
LCD frame sheet
Touch panel flat cable
Touch panel ASSY
Assembling Note:
• If you replaced the Touch panel ASSY, refer to
UNIT OR PANEL CONTROL PCB" in Chapter 4
Taptite cup B M3x10
Locks
Boss
Panel unit
Fig. 3-49
"4. IF YOU REPLACE THE PANEL
to configure settings.
3-57
Panel key PCB presser
Key PCB ASSY
Locks
Anti static plate
Confidential