Touch Panel Assy - Brother DCP-7080 Service Manual

9.14.3 Touch Panel ASSY

(1) Remove the two taptite cup B M3x10 screws to remove the panel key PCB presser from
the panel unit.
(2) Disconnect the touch panel flat cable from the key PCB ASSY.
(3) Remove the touch panel plate and the LCD frame sheet from the panel unit.
(4) Remove the touch panel ASSY from the panel unit.
Taptite cup B M3x10
Panel key PCB presser
Touch panel plate
Touch panel flat cable
LCD frame sheet
Touch panel ASSY
Key PCB ASSY
Panel unit
Fig. 3-55
Assembling Note:
• If you replaced the touch panel ASSY, refer to "4. IF YOU REPLACE THE PANEL UNIT
OR PANEL PCB UNIT" in Chapter 4 to configure settings.
3-60
Confidential