Brother DCP-7090 Service Manual page 67

Error message
Initial display
Journal Full -
Machine Error -
Machine Error -
F9
Manual Feed Load Paper.
Media Reload correct
Mismatch paper in MP Tray,
then press Go.
Reload correct
paper in Tray 1, then
press Go.
No Cartridge Put the Toner
Cartridge back in.
No Drum Unit Open the Front
Cover, then install
the Drum Unit.
No Paper Reload paper in
Tray.
No Paper MP Reload paper in MP
Tray.
Scroll
The number of the registered
communication management
reports reached 200.
Detected that the modem PCB
is not connected.
The spec code was not entered
correctly.
There is no paper set in the
manual feed slot on the manual
feed slot printing.
When printing from the MP tray,
paper type setting in the
machine does not match the
setting in the driver.
When printing from the paper
tray, paper type setting in the
machine does not match the
setting in the driver.
Toner cartridge could not
communicate with the cartridge
sensor.
Detected that the drum unit was
not set by detecting the
electrodes current.
Detected that there was no
paper set in all trays when
TrayAuto was selected for
printing.
Detected that there was no
paper set in all trays when
TrayAuto was selected for
printing.
(At Fax / List printing)
When paper was fed from the
MP tray, the MP paper empty
sensor detected that no paper
was in the MP tray.
When paper was fed from the
MP tray, the MP paper empty
sensor detected that no paper
was in the MP tray.
(At Fax / List printing)
2-27
Description
Error Refer
codes to:
--- 4.14.5
D200 2-70
F900 2-72
8C00 2-61
9201 2-62
9202 2-62
2500 2-51
6200 2-55
9309 2-64
--- 4.2.1
9301 2-63
--- 4.2.2
Confidential