If You Replace The Panel Unit Or Panel Control Pcb; Adjusting Touch Panel (Function Code 61) (Touch Panel Models Only); Checking Lcd Operation (Function Code 12) - Brother DCP-7090 Service Manual

4. IF YOU REPLACE THE PANEL UNIT OR
PANEL CONTROL PCB
 What to do after replacement

• Adjusting Touch Panel (Function code 61) (Touch panel models only)

• Checking LCD Operation (Function code 12)

 What you need to prepare (Touch panel models only)
(1) Touch pen
4.1 Adjusting Touch Panel (Function code 61)
(Touch panel models only)
Adjust the touch panel as described in
Chapter 5.
4.2 Checking LCD Operation (Function code 12)
Check the LCD operation as described in
Chapter 5.
"1.3.18 Adjust touch panel (Function code 61)" in
"1.3.6 Check LCD operation (Function code 12)" in
4-11
Confidential