Brother DCP-7090 Service Manual page 199

(6) Remove the three Taptite bind B M4x12 screws to remove the Hinge ASSY L from the ADF
unit.
(7) Remove the Taptite cup B M3x10 screw to remove the Hinge R support and the Hinge R
from the Hinge arm R.
(8) Remove the three Taptite cup B M3x10 screws to remove the Hinge arm R from the ADF
unit.
Taptite cup B M3x10
ADF unit
ADF unit
Fig. 3-32
Hinge R
Fig. 3-33
3-42
Taptite bind B M4x12
Hinge ASSY L
Taptite cup B M3x10
Hinge R support
Taptite cup B M3x10
Hinge arm R
Confidential