Brother DCP-7090 Service Manual page 75

Error message
Upper line
Jam Inside -
Jam MP Tray -
Jam Rear -
Jam Tray -
Journal Full Journal Full
Machine Error -
Machine Error -
F9
Manual Feed -
Media Type Reload correct
Mismatch paper in MP Tray,
then press [Retry].
Reload correct
paper in Tray1, then
press [Retry].
No Cartridge Put the Toner
Cartridge back in.
No Drum Unit Open the Front
Cover, then install
the Drum Unit.
Lower line
After the registration rear sensor
detects paper pass, the eject
sensor does not detect paper
pass.
When the paper is fed from the
MP tray, after the MP paper
empty sensor detects paper
pass, the registration rear
sensor does not detect paper
pass after a set period of time.
After the registration rear sensor
detects the end of paper pass
and the specified period of time
has passed, the eject sensor
continues to detect paper pass.
When printing from the paper
tray, the registration front sensor
does not detect paper pass
within the specified time after
the T1 paper feed sensor
detected paper pass.
The number of the registered
communication management
reports reached 200.
Detected that the modem PCB
is not connected.
The spec code was not entered
correctly.
There is no paper set in the
manual feed slot on the manual
feed slot printing.
When printing from the MP tray,
paper type setting in the
machine does not match the
setting in the driver.
When printing from the paper
tray, paper type setting in the
machine does not match the
setting in the driver.
Toner cartridge could not
communicate with the cartridge
sensor.
Detected that the drum unit was
not set by detecting the
electrodes current.
2-35
Description
Error Refer
codes to:
7000 2-58
7200 2-59
7100 2-59
7302 2-60
--- 4.14.5
D200 2-70
F900 2-72
8C00 2-61
9201 2-62
9202 2-62
2500 2-51
6200 2-55
Confidential