Brother DCP-7090 Service Manual page 73

Error message
Initial display
Wrong Paper Reload correct
Size paper in the MP
Tray or press Start.
Reload correct
paper in Tray 1 or
press Start.
Wrong Toner Open the Front
Cover, then install
Toner Cartridge
2-sided Close the Back
Disabled Cover of the
machine.
Scroll
MP tray ran out of paper and the
paper tray alternatively chosen
has paper in different size when
the paper used for copy was
from the MP tray and the choice
of tray was set to Auto.
Paper tray ran out of paper and
the MP tray alternatively chosen
has paper in different size when
the paper used for copy was
from the paper tray and the
choice of tray was set to Auto.
Cartridge sensor detected that
the incompatible toner cartridge
was installed.
The back cover sensor detected
the open state when 2-sided
printing is started (before the
registration of printing in the
engine).
The back cover sensor detected
the open state during 2-sided
printing (after the registration of
printing in the engine).
2-33
Description
Error Refer
codes to:
--- 4.14.1
--- 4.14.1
2200 2-51
8903 2-61
8904 2-61
Confidential