Brother DCP-7090 Service Manual page 76

Error message
Upper line
No Paper Reload paper in
Tray.
Reload correct
paper in Tray1, then
press [Retry].
No Paper MP -
No Paper -
Tray1
No Toner Open the Front
Cover, then install
Toner Cartridge.
Out of Fax Delete unwanted
Memory fax data.
Print fax data from
All settings > Fax >
Print Fax
Out of Memory Press Stop[x].
Phone line Check line
may not be connection.
connected Refer to User's
Guide.
Paper loaded Change the
in MP Tray settings?
Lower line
Detected that there was no
paper set in all trays when
TrayAuto was selected for
printing.
Detected that there was no
paper set in all trays when
TrayAuto was selected for
printing.
(At Fax / List printing)
When paper was fed from the
MP tray, the MP paper empty
sensor detected that no paper
was in the MP tray.
When paper was fed from the
MP tray, the MP paper empty
sensor detected that no paper
was in the MP tray.
(At Fax / List printing)
When paper was fed from the
paper tray, the T1 paper empty
sensor or T1 paper feed sensor
detected that no paper was in
the paper tray.
When paper was fed from the
paper tray, the T1 paper empty
sensor or T1 paper feed sensor
detected that no paper was in
the paper tray.
(At Fax / List printing)
The new toner sensor detected
that no toner cartridge was set.
The new toner box sensor
detected that no toner box was
set.
The memory becomes near full
when Fax preview is ON.
The memory becomes near full
when Fax preview is OFF and
memory reception is ON.
The memory is insufficient to
expand the data of PC-Print.
Auto-detect ended without
detecting the line voltage.
No paper in the MP tray.
2-36
Description
Error Refer
codes to:
9309 2-64
--- 4.2.1
9301 2-63
--- 4.2.2
9302 2-63
--- 4.2.1
6101 2-55
6106 2-55
--- 4.13.4
--- 4.13.4
C700 2-70
--- 4.13.3
--- 4.14.1
Confidential