9.14 Panel unit
9.14.1 Panel unit
(1) Remove the four Taptite cup B M3x10 screws.
(2) Release each Hook to remove the Panel unit. Disconnect the Panel flat cable from the
Panel PCB ASSY.
Note:
• When removing the Panel unit, DO NOT pull the Panel unit strongly because it is
connected to the Panel flat cable.
Taptite cup B M3x10
Harness routing: Refer to
(For Non-touch panel models)
Panel flat cable
Panel PCB ASSY
Fig. 3-50
"3. Document scanner
Panel unit
Taptite cup B M3x10
unit".
3-58
Hooks
Confidential