Brother DCP-7090 Service Manual page 64

Error
Description
Codes
The document scanning position
sensor detected that the document
BF00 length was 400 mm or longer and
could not be fed to ADF (double-side
restoration).
C001 ---
C002 ---
C003 ---
C004 ---
C100 ---
The memory is insufficient to expand
C700
the data of PC-Print.
The memory used to store secure print
C800 data exceeded the memory size for
secure print data.
C900 ---
CA00 ---
An error occurred while initializing the
D100
modem.
Detected that the modem PCB is not
D200
connected.
An error occurred while initializing the
D800
touch panel.
D900 ---
DA00 ---
DB00 ---
An error occurred in the ROM check
E000
sum.
E001 ---
E002 ---
E100 Program error
E400 ---
An error occurred during access to the
E500
DRAM in the main PCB ASSY.
Write error in the EEPROM of the main
E600
PCB ASSY
E701 System error in the flash ROM
E702 Read error in the flash ROM
An error occurred while initializing the
E900
NFC.
EC00 ---
Refer Error
to: Codes
2-70 ED00 ---
EE00 ---
The spec code was not entered
F900
correctly.
FA01 ---
FA02 ---
FA03 ---
2-70 FB01 ---
2-70 FB02 ---
FB03 ---
FB04 ---
2-70 FB05 ---
2-70 FB06 ---
2-71 FB07 ---
FB08 ---
FB09 ---
FB0A ---
2-71 FB0B ---
FB0C ---
FB0D ---
2-71 FB0E ---
FB0F ---
2-71 FC01 ---
2-71 FC02 ---
2-71 FC03 ---
2-71 FC04 ---
2-72 FC05 ---
2-24
Description
Confidential
Refer
to:
2-72