Recycling; Certification - zortrax Inkspire User Manual

Recycling

Disposal of paper and plastic packaging
To protect the environment, the Manufacturer recommends placing used paper and
plastic packaging in specially designated containers, according to your local recycling
guidelines.
Disposal of resin
Printing and post-processing waste, including empty bottles, failed prints, supports, rafts
as well as paper towels with resin residues should be put in the UV Station or in any
source of UV light before disposal. Uncured resin has to be disposed of in accordance with
national and local regulations concerning hazardous waste.
Detailed information regarding usage and waste disposal of the liquid detergent utilized
to clean 3D prints should be found in the SDS delivered by the producer of the liquid.
Waste electrical and electronic equipment
This symbol indicates that it is electrical and electronic equipment which must not be
disposed of with household waste. Substances contained in the equipment may be
harmful to natural environment. Waste electrical and electronic equipment cannot be
disposed of in landfills and must be recycled. For information on where to dispose of
waste equipment, contact the reseller, the Manufacturer, or the importer of the device.
Disposing of waste electrical and electronic equipment along with other waste is
prohibited by the Directive 2012/19/UE.

Certification

The Manufacturer ensures that the equipment complies with all relevant standards.
In case of questions and problems contact the Manufacturer through the support
form: http://support.zortrax.com/support-form/.
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
56
document are registered trademarks of Zortrax and are subject to legal protection.