zortrax Inkspire User Manual page 48

2. Hotend
Activity
Cleaning the underside
of the FEP film
Checking if there are
residues of cured resin
in the tank
Checking if there are
residues of cured resin
on the FEP film
Emptying and cleaning
the resin tank
Replacing the FEP film
48
Frequency Solutions to the problems
Every Soak a paper towel in IPA and
time the clean the underside of the FEP
resin tank is film.
removed
Before each Use a plastic spatula and slightly
printing mix the resin to check if there are
process any residues in the liquid.
Before each Empty the resin tank. If there are
printing any residues of cured resin on
process the FEP film, remove them using
a plastic spatula.
Every time Insert the resin filter into the sil-
the resin icone funnel and pour the resin
type left in the tank into the bottle.
or color is Follow the instructions in the
changed manual:
com/resin-tank-cleaning/
Once the Follow the instructions in the
FEP film manual:
becomes com/fep-film-replacement/
bent, de-
formed, or
perforated
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
https://support.zortrax.
https://support.zortrax.
Necessary accessories
-paper towels,
-IPA,
-safety gloves
-a plastic spatula,
-safety gloves
-a plastic spatula,
-safety gloves
-resin filter,
-silicone funnel,
-bottle of resin,
-paper towels,
-a plastic spatula,
-Ultrasonic Cleaner
(optional)
-a new FEP film,
-a screwdriver,
-paper towels,
-IPA,
-safety gloves