zortrax Inkspire User Manual page 49

3. Platform
Activity
Cleaning the platform
Calibration
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
Frequency Solutions to the problems
Before each Cured resin should be removed
printing using a spatula. Liquid resin
process should be removed using a pa-
per towel.
After each Adjust the platform's position
failed print and tighten the platform screw.
or The platform has to properly
after three adhere to the LCD screen. Follow
completed the instructions in the manual:
printing https://support.zortrax.com/
processes platform-calibration-inkspire/
Necessary accessories
-spatula,
-paper towels,
-Ultrasonic Cleaner
(optional)
-
49