zortrax Inkspire User Manual page 6

Mechanical Safety
The Zortrax Inkspire has movable components, such as the build platform and the Z-axis.
Therefore, it is forbidden to reach into the printer or put anything inside the printer when
it is running, about to start running or at rest. This may lead to serious injuries or damage.
Tools and accessories delivered with the printer should be used with special care only for
intended purposes. Improper use may cause serious injuries.
While following post-processing procedures, wear safety gloves and glasses to avoid
injuries that may be cause by sharp edges and fragile elements of models.
A finished print must be removed from the platform outside the printer, after both the
platform and the model have been cleaned from uncured resin in a liquid detergent.
To avoid injuries, be particularly careful while removing prints from the platform. Always
wear gloves and glasses.
The FEP film that is installed in the resin tank is very thin and fragile, therefore, special care
should be taken when cleaning, installing and disassembling the tank.
Risk of Burns
There is no risk of burns as all components working in high temperatures are enclosed and
protected from being touched.
Constructional modifications of the printer' s operating temperature are not permitted as it may
cause serious injuries or bring damage to the device.
Safe Storage and Transport Guidance
Zortrax devices must be stored between 0 and 35° C [32 - 95° F]. The storage space should be
free of moisture and other extreme conditions.
Transport instructions:
When stacking several devices on a pallet, follow the instructions provided on the packaging.
Once device may weigh more than 10 kg [22 lb]. It is therefore advisable to provide safe
pallet storage but not higher than 1.7 m [5'7'']. It should be noted that the packages must
not project beyond the outline of the pallet. Packages stacked on the pallet should be then
bound together and wrapped in foil. The pallet prepared as above can be then forwarded to
the shipping company.
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
6
document are registered trademarks of Zortrax and are subject to legal protection.