zortrax Inkspire User Manual page 40

6. Immediately put the platform with the model in the Ultrasonic Cleaner. The model cannot be exposed to
the UV light. Turn on the device. Cleaning time depends on the size of the model, but it shouldn't exceed
three minutes. Longer cleaning time causes the liquid to heat up.
7. Turn off the Ultrasonic Cleaner and remove the platform with the model.
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
40
document are registered trademarks of Zortrax and are subject to legal protection.