zortrax Inkspire User Manual page 44

14. Clean the LCD screen and the outside of the FEP film with a soft cloth. Install the resin tank back in its
place (A) and secure it with the two screws (B).
15. Clean the platform surface with a spatula to remove the residues of cured resin. Next, put the platform
in the Ultrasonic Cleaner and turn on the device for about 30-60 seconds.
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
44
document are registered trademarks of Zortrax and are subject to legal protection.