Recycling; Certification - zortrax Curing Station User Manual

Recycling

Disposal of paper and plastic packaging
To protect the environment, the Manufacturer recommends placing used paper and
plastic packaging in specially designated containers, according to your local recycling
guidelines.
Disposal of resin
Printing and post-processing waste, including empty bottles, failed prints, supports, rafts
as well as paper towels with resin residues should be put in the Zortrax Curing Station
or in any source of UV light before disposal. Uncured resin has to be disposed of in
accordance with national and local regulations concerning hazardous waste.
Disposal of cleaning solvent
Detailed information regarding usage and waste disposal of the liquid detergent utilized
to clean 3D prints should be found in the SDS delivered by the producer of the liquid.
Waste electrical and electronic equipment
This symbol indicates that it is electrical and electronic equipment which
must not be disposed of with household waste. Substances contained in
the equipment may be harmful to natural environment. Waste electrical
and electronic equipment cannot be disposed of in landfills and must be recycled.
For information on where to dispose of waste equipment, contact the reseller, the
Manufacturer, or the importer of the device. Disposing of waste electrical and electronic
equipment along with other waste is prohibited by the Directive 2012/19/UE.

Certification

The Manufacturer ensures that the equipment complies with all relevant standards.
In case of questions and problems contact the Manufacturer through the support
form: http://support.zortrax.com/support-form/.
©2022, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
23