zortrax Inkspire User Manual page 29

3. Insert the resin filter into the silicone funnel and put them together in the bottle with resin. Pour the resin
left in the tank through the filter and funnel. If it is necessary, use a plastic spatula.
Once you finish, clean the resin filter in a liquid detergent or isopropyl alcohol. If it's necessary, you can also
clean the resin tank using the same liquid.
4. Put the resin tank in the Ultrasonic Cleaner and turn on the device for about 30-60 seconds.
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
29
document are registered trademarks of Zortrax and are subject to legal protection.