zortrax Inkspire User Manual page 47

1. Main
Activity
Cleaning the machine,
its interior and sur-
roundings
Checking the degree of
wear of the carbon fil-
ter and if it's necessary,
cleaning it
Replacing the filter
Cleaning the LCD
screen
Cleaning the UV cover
©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
Frequency Solutions to the problems
Before each Remove dust and drops of resin
printing from the machine with paper
process towels. If it's necessary, use IPA.
Every 500 -
working
hours
Every 3-4 The filter is installed in the back
months right corner of the printer's
housing.
Every Soak a paper towel in IPA and
time the clean the LCD screen.
resin tank is
removed
Once a week Clean the cover from dust using
a soft cloth.
NOTE! Do not use IPA or chemi-
cal detergents for that purpose.
Necessary accessories
-paper towels,
-IPA,
-safety gloves
-
-a new filter
-paper towels,
-IPA,
-safety gloves
-a soft cloth
47