Dimensions Of Flue Gas Outlet Pipe; Length Of The Air And Flue Gas Pipes - REMEHA Gas 210 ECO PRO Series Installation, User And Service Manual

6 Installation
Fig.11 Dimensions of open connection
ød
1
Fig.12 Dimensions of parallel connection
ød
1
30
6.4.4
d
Tab.13
150 mm
AD-3001094-01
d
D
Tab.14
150/150 mm
øD
1
AD-3000963-01
6.4.5
The maximum length of the flue gas outlet and air supply channel vary de­
pending on the appliance type; consult the relevant chapter for the correct
lengths.
In an open design, the air input remains open; only the flue gas outlet will
be connected. The boiler receives the necessary combustion air direct
from the installation room.

Dimensions of flue gas outlet pipe

Warning
The pipes connected to the flue gas adapter must satisfy the fol­
lowing dimension requirements.
External dimensions of flue gas outlet pipe
1
Dimensions of pipe
d (min-max)
1
149 - 151 mm
External dimensions of flue gas outlet pipe
1
External dimensions of air supply pipe
1
Dimensions of pipe
d (min-max)
1
149 - 151 mm

Length of the air and flue gas pipes

Important
When using bends, the maximum chimney length (L) must be
shortened according to the reduction table.
For adaptation to another diameter use approved transitions
The boiler is also suitable for longer chimney lengths and diam­
eters other than those specified in the tables. Contact us for
more information.
Room-ventilated model (B
D (min-max)
1
149 - 151 mm
)
23P
114494 - v.05 - 06022018