Clean Heat Exchanger - REMEHA Gas 210 ECO PRO Series Installation, User And Service Manual

10 Maintenance
Fig.37 Clean the heat exchanger
1
4
6
56
2
3
3
5
AD-0001425-01
10.3.2

Clean heat exchanger

1. Unscrew the nuts from the inspection hatch on the heat exchanger.
2. Remove the inspection hatch from the heat exchanger.
3. Clean spaces between pins on the heat exchanger using the special
cleaning tool/cleaning knife or compressed air. Always work from the
bottom to the top. Move the cleaning knife between the pins horizon­
tally and diagonally.
4. Then reattach all the parts that have been removed.
114494 - v.05 - 06022018