Table of Contents
Advertisement
Invacare® Storm⁴ Series
Recaro Seat
Removing Seat Support Plate
1. Loosen and remove Allen screws A.
2. Remove seat support plate B.
Installing Seat Support Plate
1. Replace seat support plate B.
Use holes C to adjust height of seat support plate.
2. Insert and tighten Allen screws A.
3. Refit all parts you have removed.
4. Test all functions.
6.12.2 Replacing Tilt Actuator
•
Oblique pliers
•
Cable ties
Removing Tilt Actuator
1. Remove legrests.
2. Unplug actuator plug out of module.
3. Remove cable ties.
4. Remove cable.
5. Remove upper pin retainer clip A.
6. Remove upper pin B and tip tilt actuator E forward.
7. Remove lower pin retainer clip D.
8. Remove lower pin C and tilt actuator.
9. Replace tilt actuator.
Installing Tilt Actuator
1. Install parts in reverse order.
2. Test all functions.
6.12.3 Replacing Tilt Spindle
•
Oblique pliers
88
Fig. 6-113
Fig. 6-114
1533060-N
Advertisement
Table of Contents
