Replacing The Tilt Actuator - Invacare Storm4 Service Manual

®
Invacare - STORM

8.14.4 Replacing the tilt actuator

Requirements:
· Oblique pliers
· Cable ties
Dismantling the tilt actuator:
·
Remove the legrests.
·
Pull the tilt actuator plug out of the actuator module under the seat
·
Unclip the cable. Remove any cable ties which are fitted.
·
Remove the upper pin retainer (1).
·
Remove the upper pin (2) and tip the tilt actuator forward (5).
·
Remove the lower pin retainer (4).
·
Remove the lower pin (3) and remove the entire tilt actuator.
·
Replace the tilt actuator.
Refitting the tilt module:
·
Refit the parts later in reverse order.
·
To conclude, check all the mobility aid functions.
4
SERVICE MANUAL
131