Replacing Usb Charger; Replacing 4-Way Bus Socket - Invacare Storm 4 Series Service Manual

4. Take off solid angle sensor box E from solid angle sensor bracket.
5. Replace solid angle sensor bracket.
Installing solid angle sensor bracket
1. Install parts in reverse order.

6.9.10 Replacing USB charger

• 4 mm Allen wrench
When charger overheats, it stops working. Rail under the seat serves to dissipate heat.
• Always mount USB charger in first third of the rail of telescopic seat frame.
Removing USB charger
1. Loosen and remove screw D including washer C.
2. Take off USB charger B from rail of telescopic seat frame A.
3. Replace USB charger.
Installing USB charger
1. Install parts in reverse order.
6.9.11 Replacing 4–way bus socket
• Philips screwdriver
Removing 4–way bus socket
1. Remove all cables from 4–way-bus socket.
2. Loosen and remove screws A.
3. Take out 4–way bus socket B and replace.
Installing 4–way bus socket
1. Install parts in reverse order.
1533060-N
Service
65