Invacare® Storm⁴ Series
Removing Batteries
1. Make batteries accessible. See 6.10.3 Making Batteries
Accessible, page 75.
2.
Remove pole caps A on battery C.
3. Remove pole screws under pole caps.
4. Remove connecting cable D and fuse cable B.
5. Lift battery from battery tray.
6. Pull on strap of second battery to move it forward.
7. Dismantle cables on second battery as well.
8. Lift second battery from battery tray.
Installing Batteries
1. Refit batteries in reverse order.
2. Make sure battery cage sockets/plugs have been
correctly refitted. A polarity diagram is located in rear
shroud.
6.11 Lighting Unit
6.11.1 Replacing Front Bulb
•
Size 2 Phillips screwdriver
1. Loosen and remove screw (1) on rear of headlight.
2. Remove glass.
3. Replace defective bulb.
4. Refit glass and tighten screw (1).
It is not intended for an individual LED to be replaced. Replace the entire lighting unit as described in 6.11.4
Replacing Headlight (LED), page 78 or 6.11.8 Replacing Headlight Holder (LED), page 82.
6.11.2 Replacing Headlight (Conventional)
•
Size 2 Phillips screwdriver
•
8 mm wrench
•
Oblique pliers
•
Tie wraps
76
Fig. 6-81
Fig. 6-82
1533060-N