Replacing Headlight (Led) - Invacare Storm 4 Series Service Manual

Invacare® Storm⁴ Series
5. Loosen screw A, remove washer B and headlight with
holder.
6. Take care of slot nut C inside rail.
7. Loosen both screws D to remove headlight from
holder E.
8. Replace headlight.
Installing Headlight
1. Install parts in reverse order.
2. Install cables carefully and secure them with cable
clamps and tie wraps.
3. Tighten screws finger-tight.
4. Adjust headlight roughly using ratchet plate as a guide.
The user can carry out final adjustment following user
manual.
5. Test all functions.

6.11.4 Replacing Headlight (LED)

• 4 mm Allen key
• Oblique pliers
• Tie wraps
78
Fig. 6-86
Fig. 6-87
1533060-N