Veeder-Root TLS-350 System Setup Manual page 99

7
In-Tank Setup
Press CHANGE, enter the height:
T1: (Product Label)
HEIGHT : 88.32
Press ENTER:
HEIGHT : 88.32
PRESS <STEP> TO CONTINUE
Press STEP:
T1: (Product Label)
88.32 INCH VOL : 000000
Press CHANGE, enter the volume at this height:
T1: (Product Label)
88.32 INCH VOL : 9200
Press ENTER to accept the entry:
88.32 INCH VOL : 9200
PRESS <STEP> TO CONTINUE
Press STEP and follow the above procedure to continue adding height/volume points until you are finished.
C - Removing Height/Volume Points
At the display below:
T1: REMOVE HEIGHT/VOL PT
PRESS <ENTER>
Press ENTER and if necessary, press STEP until you display the height/volume point you want to remove:
88.32 INCH VOL : 9200
T1 : REMOVE: NO
Press CHANGE:
88.32 INCH VOL : 9200
T1 : REMOVE: YES
Press ENTER to confirm:
T1 : REMOVE: YES
PRESS <STEP> TO CONTINUE
Press STEP and follow the above procedure to continue removing height/volume points until you are finished.
7-8
Full Volume