Veeder-Root TLS-350 System Setup Manual page 101

7
In-Tank Setup
D - Viewing Height/Volume Points
At the display below:
T1: VIEW HEIGHT/VOL PTS
PRESS <ENTER>
Press ENTER to view the 50 points (top down) and the display appears:
T1: (Product Label)
92.16 INCH VOL: 009800
Continue to press STEP to view remaining height/volume points in descending order by height.
E - Adding Height/Volume Points
At the display below:
T1: ADD HEIGHT/VOL PTS
PRESS <ENTER>
Press ENTER to add a height/volume point and the display appears:
T1: (Product Label)
HEIGHT : 000000
Press CHANGE, enter the height:
T1: (Product Label)
HEIGHT : 88.32
Press ENTER:
HEIGHT : 88.32
PRESS <STEP> TO CONTINUE
Press STEP:
T1: (Product Label)
88.32 INCH VOL : 000000
Press CHANGE, enter the volume at this height:
T1: (Product Label)
88.32 INCH VOL : 9200
Press ENTER to accept the entry:
88.32 INCH VOL : 9200
PRESS <STEP> TO CONTINUE
Press STEP and follow the above procedure to continue adding height/volume points until you are finished.
This example shows the first height/volume point in a
96" diameter, 10,000 gallon tank
7-10
Full Volume