Usb X61/X62/X63/X64; Communication With Controllers - Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual

Technical information

8.10 Communication with controllers

8.9.5

USB X61/X62/X63/X64

USB Type A
Pin
1
2
3
4
5
6
7
8
9
8.10 Communication with controllers
Number of connections
The Unified Comfort Panels support a maximum of 16 connections to S7 controllers and 16
parallel connections via SIMATIC HTTP Protocol.
Controllers
The following controllers and communication drivers are supported by the HMI devices:
● SIMATIC S7-1500
● SIMATIC S7-1200
● SIMATIC S7-300/400
● SIMATIC S7-200
● LOGO!
● SIMOTION
● SIMATIC HTTP protocol
Additional controllers and communication drivers are supported via CSP. You can find the
CSPs for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109739698). Observe the
documentation in the respective download.
162
Name
VBUS
D-
D+
GND
RX-
RX+
GND
TX-
TX+
Meaning
+5 V, fused
Data channel USB 2.0, bidirectional
Data channel USB 2.0, bidirectional
Ground
Data input USB 3.1
Data input USB 3.1
Ground
Data output USB 3.1
Data output USB 3.1
Operating Instructions, 03/2020, A5E46641217-AA
Unified Comfort Panels