Saving Setups, Screen Images, or Data
1. Press [Save/Recall] > Save > Format .
2. Then, turn the [Entry] knob to select the type of file you want to save:
Setup (*.ipa)
8-bit or 24-bit
Bitmap image
(*.bmp)
24-bit image
(*.png)
CSV data
(*.csv)
Binary data
(*.bin)
Reference
Waveform data
(*.h5)
Power
Harmonics
data (*.csv)
Analysis
Results (*.csv)
You can also configure the [Quick Action] key to save setups, screen images, or data. See
Configuring the [Quick Action] Key
To save setup files
You can save setup files to one of 10 internal locations or to an external USB drive.
1. Press [Save/Recall] > Save > Format . Then, turn the [Entry] knob to select Setup (*.ipa).
2. Press the second softkey and use the Entry knob to select a save location. See
storage
3. Press Press to Save .
Keysight IntegraVision PA2200 Series Power Analyzers Operating and Service Guide 161
The horizontal timebase, vertical sensitivity, trigger settings, measurements,
cursors, and math function settings that tell the instrument how to make a
particular measurement.
The screen image in full-color (24-bit) or reduced-color (8-bit) bitmap format.
The screen image in 24-bit color PNG format. Files are losslessly compressed
to be much smaller than the BMP format.
A file of comma-separated values of all displayed channels and math
waveforms. This format is suitable for spreadsheet analysis.
A binary file, with a header, and data in the form of time and voltage pairs.
Waveform data in a format that can be recalled to one of the instrument's
reference waveform locations.
A file of comma-separated values with harmonics power analysis results.
A file of comma-separated values with power analysis results for any analysis
other than harmonics.
for details.
locations.
To navigate