AT-6 TEXAN _
CODE SEA 110
INSTALLING THE FUSELAGE SERVOS-
SWITCH.
Switch.
Elevator.
Rudder.
M3 x15mm.
THROTTLE SERVO ARM INSTALLATION.
) Install adjustable servo connector in
1
the servo arm as same as picture below:
Nut.
18
.
Throttle.
Adjustable Servo
connector.
Servo arm.
Elevator servo .
INSTALLING THE HORIZONTAL STABILIZER.
When cutting through the covering to re-
move it, cut with only enough pressure
to only cut through the covering itself. Cutting
into the balsa structure may weaken it.
Remove covering.
Pen.
Throttle servo arm.
Rudder servo.
Draw center line.