Installing The Horizontal Stabilizer - Seagull Models Aviat A-1C Christen Husky 80 Assembly Manual

Aviat A-1C Christen Husky 80" wingspan size 15-20cc
5.
6.
7.
8.
24
C/A glue
INSTALL ELEVATOR CONTROL HORN
1.
Fiberglass control horn
2.
3.
Elevator iberglass control horn
INSTALLING THE HORIZONTAL
STABILIZER
Using a ruler and a pen, locate the cen-
terline of the horizontal stabilizer, at the
trailing edge, and place a mark. Use a tri-
angle and extend this mark, from back to
front, across the top of the stabilizer. Also
extend this mark down the back of the
trailing edge of the stabilizer.
Instruction Manual.
Epoxy