Labeling A Cassette - Sony Handycam DCR-VX2100E Operating Instructions Manual

Labeling a cassette

If you use a tape with cassette memory,
you can label a cassette. The label can
consist of up to 10 characters and is
stored in cassette memory. When you insert
the labeled cassette and set the POWER switch
to VCR, CAMERA, or MEMORY, the label is
displayed for about five seconds.
(1) Insert the cassette you want to label.
(2) Set the POWER switch to VCR or
CAMERA.
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select
TAPE TITLE, then press the dial. The tape
title display appears.
(6) Turn the SEL/PUSH EXEC dial to select the
column of the desired character, then press
the dial.
(7) Turn the SEL/PUSH EXEC dial to select the
desired character, then press the dial.
(8) Repeat steps 6 and 7 until you finish the
label.
(9) Turn the SEL/PUSH EXEC dial to select
[SET], then press the dial.
The label is stored in memory.
3
MENU
4,5
CM SET
CM SEARCH
TAPE T I TLE
T I TLE DSPL
T I TLEERASE
I TEM ERASE
ERASE ALL
CM SET
CM SEARCH
TAPE T I TLE
T I TLE DSPL
T I TLEERASE
[ MENU ] : END
I TEM ERASE
ERASE ALL
RETURN
[ MENU ] : END
– – – – – – – – – –
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
2
POWER
6-8
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
TAPE T I TLE
M – – – – – – – – –
[ MENU ] : END
151