Labeling A Cassette - Sony RMT-811 Service Manual

Labeling a cassette

If you use a tape with cassette memory, you can label a cassette. The label can
consist of up to 10 characters and is stored in cassette memory. When you insert
the labeled cassette and set the POWER switch to VCR, CAMERA, or
MEMORY, the label is displayed for about five seconds.
(1) Insert the cassette you want to label.
(2) Set the POWER switch to VCR or CAMERA.
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select
(5) Turn the SEL/PUSH EXEC dial to select TAPE TITLE, then press the dial. The
tape title display appears.
(6) Turn the SEL/PUSH EXEC dial to select the column of the desired character,
then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
(8) Repeat steps 6 and 7 until you finish the label.
(9) Turn the SEL/PUSH EXEC dial to select [SET], then press the dial.
The label is stored in memory.
3
MENU
4,5
CM SET
CM SEARCH
TAPE T I TLE
T I TLE DSPL
T I TLEERASE
I TEM ERASE
ERASE ALL
CM SET
CM SEARCH
TAPE T I TLE
T I TLE DSPL
T I TLEERASE
[ MENU ] : END
I TEM ERASE
ERASE ALL
RETURN
[ MENU ] : END
– – – – – – – – – –
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
, then press the dial.
2
POWER
6-8
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
TAPE T I TLE
– – – – – – – – – –
[ MENU ] : END
TAPE T I TLE
M – – – – – – – – –
[ MENU ] : END
105