Sony Handycam DCR-VX2100E Operating Instructions Manual page 118

Dubbing only desired scenes
– Digital program editing
When the VCR does not operate
correctly
Set the IR SETUP code, or select the button to
cancel the recording pause on the VCR.
Preparation 2: Setting the VCR
to operate with an i.LINK
cable
When you connect using an i.LINK cable
(optional), follow the procedures below.
(1) Set the POWER switch to VCR on your
camcorder.
(2) Turn the power of the connected VCR on,
then set the input selector to DV input.
When you connect a video camera recorder,
set its POWER switch to VCR.
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select
EDIT SET, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select
CONTROL, then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select
i.LINK, then press the dial.
118
(1)
(2)
(3)
(4)
(5)
(6)
(7)