Step 3 Inserting A Cassette - Sony Handycam DCR-VX2100E Operating Instructions Manual

Step 3 Inserting a
cassette
(1) Install the power source.
(2) While pressing the small blue button on the
EJECT switch, slide it in the direction of the
arrow. After the cassette lid is opened, the
cassette compartment automatically opens.
(3) Push the middle portion of the back of the
cassette to insert it.
Insert the cassette in a straight line deeply
into the cassette compartment with the
window facing out and the write-protect
tab facing upward.
(4) Close the cassette compartment by pressing
the PUSH mark on it.
(5) Close the cassette lid until it clicks by
pressing the PUSH button on the lid.
2
To eject a cassette
Follow the procedure above, and take out the
cassette in step 3.
Note
The cassette lid will not be closed when you
press any part of the lid other than the PUSH
button.
22
(1)
(2)
(3)
(4)
(5)
Window/
3,4
PUSH
Write-protect tab/
5
PUSH