Sony Handycam DCR-VX2100E Operating Instructions Manual page 57

Using the fader function
(1) When fading in [a]
In standby mode, press FADER until the
desired fader indicator flashes.
When fading out [b]
In recording mode, press FADER until the
desired fader indicator flashes.
The indicator changes as follows:
FADER t MONOTONE t OVERLAP t
WIPE t DOT t no indicator
The last selected fader mode is indicated
first.
(2) Press START/STOP. After the fade in/out
is carried out, your camcorder
automatically returns to the normal mode.
1
FADER
To cancel the fader function
Press FADER until the indicator disappears.
Note
You cannot use the following functions while
using the fader function, and vice versa:
– Digital effect
– Low lux mode of PROGRAM AE (Only in
OVERLAP, WIPE, or DOT mode)
– Tape Photo recording
– Interval recording
– Cut recording
When the OVERLAP, WIPE, or DOT indicator
appears
Your camcorder automatically stores the image
recorded on a tape. As the image is being
stored, the fader indicator flashes fast, and the
playback picture appears.
FADER
(1)
t
t t
(2)
2
t t
POWER
57