Sony Handycam DCR-VX2100E Operating Instructions Manual page 215

About i.LINK
About data transfer speed of i.LINK
i.LINK defines a maximum data transfer speed
of approximately 100, 200 and 400 Mbps* that
are described as S100, S200 and S400
respectively.
For i.LINK devices, a maximum data transfer
speed that the device supports is identified on
"Specifications" page of the operating
instructions supplied with the device or near
its i.LINK connector.
With a device that does not identify the data
transfer speed, the maximum data transfer
speed that the device supports is S100.
When connecting with the device that support
different data transfer speed, the actual data
transfer speed may be different from those
described on the i.LINK connectors.
*What is Mbps?
Mega bits per second. A measure of the rate at
which data is transmitted per second. In case
of 100 Mbps, 100 Mega bits of data can be
transmitted per second.
i. LINK operation with your camcorder
For details on dubbing your camcorder to your
VCR equipped with DV Interface, see page
108, 132.
Your camcorder is available for use with other
devices equipped with Sony i.LINK connector
(DV Interface) connector (eg. VAIO personal
computer series).
Beware that some of the video equipment such
as the Digital Televisions, the DVD recorders/
players or the MICROMV recorders/players
are equipped with the i.LINK connector but
not compatible with the DV equipment. Be
sure to confirm whether the equipment is
compatible with the DV equipment or not
before connecting your camcorder to it.
For details on connection with i.LINK cable
and necessary software, refer to the operating
instructions supplied with the connected
device.
Use Sony i.LINK cables
Use Sony i.LINK cables to connect the i.LINK
devices.
4 pins y 4 pins (For dubbing)
i.LINK and are trademarks.
y
215