Sony Handycam DCR-VX2100E Operating Instructions Manual page 253

Identifying the parts and
controls
To prepare the Remote Commander
Insert two R6 (size AA) batteries by matching
the + and – polarities on the batteries to
the + – marks inside the battery compartment.
Notes on the Remote Commander
• Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
• Your camcorder works in the commander
mode VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from
other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR
in the commander mode VTR 2, we
recommend changing the commander mode
or covering the sensor of the VCR with black
paper.
Display window
1
1 Remaining battery time(p. 14)/
Tape counter (p. 93)/
Memory counter (p. 194)/
Time code (p. 33)/
Self-diagnosis (p. 222)
2 FULL charge (p. 14)
3 Remianing battery (p. 14)
1
2
3
2
3
253