— Editing —
Dubbing a tape
Using the A/V connecting cable
Connect your camcorder to the VCR using the
A/V connecting cable supplied with your
camcorder.
Before a dubbing
Set DISPLAY to LCD in the menu settings.
(Default setting is LCD.)
Set the input selector on the VCR to LINE, if
available.
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2) Set the input selector on the VCR to LINE.
For details, refer to the operating
instructions of the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR. For details,
refer to the operating instructions of the
VCR.
A/V connecting cable (supplied)/
: Signal flow/
When you have finished dubbing
the tape
Press x on both your camcorder and the VCR.
(1)
(2)
(3)
(4)
(5)
S VIDEO
S VIDEO cable (optional)/
VIDEO
AUDIO
L/R
IN
S VIDEO
VIDEO
AUDIO
x
107