Step 2 Setting The Date And Time - Sony Handycam DCR-VX2100E Operating Instructions Manual

Step 2 Setting the
date and time
Set the date and time when you use your
camcorder for the first time. "CLOCK SET"
will be displayed each time that you set the
POWER switch to CAMERA or MEMORY
unless you set the date and time settings.
If you do not use your camcorder for about
four months, the date and time may be
cleared from memory (bars may appear)
because the built-in rechargeable battery
installed in your camcorder will have been
discharged (p.236).
First, set the year, then the month, the day, the
hour and then the minute.
(1) Press MENU to display the menu in the
standby mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select
CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust to
the desired year, then press the dial.
(5) Set the month, day and hour by turning the
SEL/PUSH EXEC dial and pressing the
dial.
(6) Set the minute by turning the SEL/PUSH
EXEC dial and pressing the dial by the time
signal. The clock starts to move.
(7) Press MENU to erase the menu display.
1,7
MENU
4
2005 1 1
12 00
20
2
MANUAL SET
AUTO SHTR
PROG. SCAN
[ MENU ] : END
6
S E T U P M E N U
2005 1 1
[ MENU ] : END
12 00
(1)
(2)
(3)
(4)
(5)
(6)
(7)
S E T U P M E N U
CLOCK SET
LTR SIZE
DEMO MODE
RETURN
[ MENU ] : END
CLOCK SET
LTR SIZE
2005 7 4
DEMO MODE
RETURN
17 30
3
S E T U P M E N U
– – : – – : – –
CLOCK SET
LTR SIZE
DEMO MODE
RETURN
[ MENU ] : END
S E T U P M E N U
4 7 2005
CLOCK SET
17:30:00
LTR SIZE
DEMO MODE
RETURN
[ MENU ] : END
2003 1 1
12 00