Sony Handycam DCR-VX2100E Operating Instructions Manual page 100

Searching a recording by date
– Date search
To stop searching
Press x.
Note
If one day's recording is less than two minutes,
your camcorder may not accurately find the
point where the recording date changes.
In the
•The bar in the
present point on the tape.
•The mark in the
actual point you are trying to search.
If a tape has a blank portion between
recorded portions
The date search function may not work
correctly.
Searching for the date
without using cassette
memory
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in
settings (p. 156). If using a tape without
cassette memory, skip this step.
(3) Press SEARCH MODE on the Remote
Commander repeatedly, until the date
search indicator appears.
The indicator changes as follows:
INDEX SEARCH t DATE SEARCH t
PHOTO SEARCH t PHOTO SCAN t no
indicator
(4) Press . on the Remote Commander to
search for the previous date or press >
on the Remote Commander to search for
the next date. Your camcorder
automatically starts playback at the point
where the date changes. Each time you
press . or >, your camcorder searches
for the previous or next date.
To stop searching
Press x.
100
mark
mark indicates the
indicates the
to OFF in the menu
x
(1)
(2)
(3)
(4)
.
>
x
t t
t t
>
.