Recording a picture
You cannot use the digital zoom:
– When you set PROG. SCAN to ON in the
menu settings (p. 156).
– When the POWER switch is set to MEMORY.
Indicators displayed during
recording
The indicators are not recorded on the tapes.
[a] Remaining battery time
This appears after you turn on the power
and wait for a while.
[b]Cassette memory
This appears when using a tape with
cassette memory.
[c] Recording mode
[d]STBY/REC
[e] Time code/Tape counter
[f] Remaining tape
This appears after you insert a cassette.
[g]Guide frame
[h]ND filter
This flashes when the ND FILTER selector
should be set. After you have set the ND
FILTER selector, the ND FILTER position
selected is indicated. (When the ND OFF
position is selected, the indication
disappears.)
[i] Time
The time is displayed about five seconds
after the POWER switch is set to CAMERA
or MEMORY.
[j] Date
The date is displayed about five seconds
after the POWER switch is set to CAMERA
or MEMORY.
[a] [b] [c] [d]
40
min
REC
0:00:01
45min
ND 1
4
7 2003
12:05:56
[j]
[i]
[e]
[f]
[g]
[h]
33