Labeling A Cassette - Sony Handycam DCR-PC9 Operating Instructions Manual

Digital video camera recorder
Hide thumbs Also See for Handycam DCR-PC9:
Table of Contents

Advertisement

Labeling
a cassette
If you use a tape with cassette memory,
you can label a cassette.
The label can
consist
of up to 10 characters
and is stored in cassette memory.
When you insert
the labeled cassette and set the POWER switch
to CAMERA
or VCR, the label is
displayed
for about 5 seconds.
(1) Insert
the cassette
you want
to label.
(2) Set the POWER
switch
to CAMERA
or VCR.
(3) Press FN to display
PAGE1.
(4) Press MENU,
then select TAPE TITLE in _
in the menu
setting,
then press
EXEC (p. 105).
(5) Select a desired
character.
Repeat
pressing
a key to select the desired
character
on the key.
(6) Press ÷ to move
the cursor
for the next character.
Repeat
the same procedure
as step 5 and 6 to complete
the label.
(7) Press SET. The label is stored
in memory.
3
To return
to FN
Press EXIT.
To erase the label
you have made
S_,lect<- in step 6. The last character is eras_M.
To change
the label
you have
made
Insc,rt the cassette, to change the, label, and operate in the same, way to make a nc_wlabel.
103

Advertisement

Table of Contents
loading

Table of Contents