Sony Handycam DCR-VX2100E Operating Instructions Manual page 247

Identifying the parts and
controls
Attaching/removing the eyecup
•When removing the eyecup, pull lightly the
upper edge of it with your fingers [a], insert a
finger into the gap that appears between the
eyecup and viewfinder [b], then remove it.
When attaching the eyecup, fit it onto the
camcorder slide it all the way along grooves
until it stops.
•Do not pull the eyecup inward or with
excessive force [c]. Doing so may damage the
eyecup.
[a]
Attaching/removing the hood with a lens
cap
To attach the hood with a lens cap, fit the line
on the hood to the corresponding line on the
lens frame, then screw the hood clockwise and
tighten the lower hood fixing screw.
To remove the hood with a lens cap, loosen the
lower hood fixing screw, and unscrew the
hood with a lens cap counterclockwise.
When using additional filters
We recommend that you use Sony made
filters.
[b]
To open/close the shutter of the
hood with a lens cap, slide the
knob to your desired direction
according to the arrow./
[a]
[c]
[c]
[b]
247